Your search resulted in 3065 documents. Displaying 25 entries per page.
Corrosion of fasteners in furfurylated wood – final report after 9 years exposure outdoors
2017 - IRG/WP 17-40810
The corrosion of some common fastener materials – mild steel, stainless steel, zinc-coated steel, brass and Sanbond Z (nickel, zinc and chromate) coated steel – has been evaluated after nine years exposure outdoors in untreated Scots pine and furfurylated beech and southern yellow pine (SYP).
The furfurylation was carried out according to a process that resulted in approximately 40 % WPG (We...
J Jermer, B-L Andersson, J Schalnat
Impact of heat treatment on physico-mechanical properties of torrefied Antholceistha djalonensis wood
2017 - IRG/WP 17-40811
Thermal modification at relatively high temperatures is an effective method to improve the dimensional stability and mechanical properties of wood. This study was carried out to investigate the impact of heat treatment on the physic-mechanical properties of torrefied Anthocleistha djalonensis wood. Thirty nine defect-free specimens of dimensions 20 mm × 20 mm × 60 were prepared for the determina...
E A Iyiola, B Olufemi, J A Fuwape, J M Owoyemi
Durability of energy efficient wooden buildings: a building physical point of view
2017 - IRG/WP 17-40812
The drive for more energy efficient and sustainable buildings resulted in an increased popularity of wooden buildings, even in countries with a masonry tradition. Often guidelines and prescriptions then are copied from other countries. Different climatic boundary conditions and tradition of finishing, though, do require different moisture tolerance criteria. This is clearly the case for water vapo...
S Roels, J Langmans
Influence of hygro-thermal treatment temperature and duration on dimensional stabilisation of wood modified with poly(butylene succinate)
2017 - IRG/WP 17-40813
To improve wood properties, especially dimensional stability, a treatment based on poly(butylene succinate) oligomers (OBS) was experimented. After impregnation in wood, a further hygro-thermal treatment (HTT) was carried out in a pressurized reactor at 100% relative humidity (RH) at differing temperatures for differing durations. The aim of HTT is to induce partial swelling of wood cell walls so ...
C Grosse, M Noël, L Rautkari, P Gérardin
Analysis of Wood Industrial Pollutants Based on Emission Coefficients
2017 - IRG/WP 17-50325
Accurate calculation and estimation pollutants is one of the basic tasks of environmental protection .The low carbon economy put forward However，low carbon economy data of wood industry is lack. The paper research on emissions and pollution of Chinese wood industry. The results showed dust emissions from much to least is: fiberboard, plywood and particle board; the amount of industrial ...
Chu Jie, Ma Ji, Zhangjing Chen
A Green and Novel Technology for Recovering Copper and Wood from Treated Wood Waste – Part II: Optimization, copper metal recovery, and process design
2017 - IRG/WP 17-50326
The US consumes 70 million pounds of copper and produces 580 million cubic feet treated wood annually. The EPA disallows burning and reusing treated wood waste due to health/environmental concerns. Vast quantities of copper and wood are landfilled. Two safe and low cost extraction systems, citric acid and ammonium citrate, were identified in Part I of this study. In Part II of the study, effects o...
S Chen, R Patel
How carbon stored in harvested wood products contribute in a greenhouse gas accounting perspective
2017 - IRG/WP 17-50327
In 2014 the net annual removal by Norwegian forests was 30.4 mill ton CO2-eqvivalents while the emissions in other sectors was 53.2 mill ton CO2-eqvivalents. Hence, forests can play a major role in the national greenhouse gas balance. But forests also contribute to the carbon pool stored in wood products. The aim of this paper is, by using Norway as an example, to illustrate how the greenhouse gas...
G Alfredsen, G Søgaard
Review of Leaching Experiments of CCA-Treated Wood and Wood Treated with Copper-based Alternatives
2017 - IRG/WP 17-50330
The objective of this study was to compare leaching rates of various wood preservatives from treated wood and the tests used to gather this information. The preservatives compared included CCA and the copper-based alternatives, MCQ, ACQ, and MCA. The tests compared included AWPA E11, SPLP, TCLP, and environmental leaching tests. Among all of the tests evaluated, environmental tests most closely si...
A Jones, J Marini, H Solo-Gabriele
Uncertainty in life cycle assessment of preservative treated wood – copper and freshwater ecotoxicity
2017 - IRG/WP 17-50331
Life cycle assessment (LCA) is a method for quantifying the environmental impacts of a product over the life cycle. In the last years, there have been a growing application of LCA in developments of environmental product declaration (EPD), which is utilised by professional procurement of materials for buildings. For legislative issues, LCA have also been used to assess application of creosote to t...
L G F Tellnes
Exploration of waterlogged piles and wooden constructions of Riga Dome Cathedral
2017 - IRG/WP 17-10901
The Riga Dome Cathedral’s waterlogged wood piles and the roofs and tower's wooden structures were investigated, the extent of biological damage was evaluated, and the wood rot fungi and insects were identified. The pile wood’s component composition and elemental composition were analysed; the wood structure damage by erosion bacteria was microscopically determined. In the roofs and tower ...
B Andersons, I Andersone, I Irbe, V Fridrihsone, R Lūsis
Testing of the resistance of acetylated wood against marine borers at three Italian sites
2017 - IRG/WP 17-30719
The aim of this research is the determination of resistance of acetylated wood against marine biodeterioration in use class 5 (EN 335) in temperate sea waters. The resistance of acetylated Pinus radiata (radiate pine) in solid and MDF form is compared with that of the untreated radiata pine and other untreated wood of European species such as Fagus sylvatica (European beech) Castanea sativa (chest...
S Palanti, M Faimali, D Tagliapietra, M Andrenacci, M Anichini, M Sigovini
Evaluation of coating applied in treated wood: experiences in Brazil
2017 - IRG/WP 17-40814
Weathering assays study the coating degradation caused by its exposure to the action of ultraviolet radiation, winds, heat and humidity. The use of test specimens in different arrangements and exposure angles is intended to reproduce various conditions in which a product can be used. The purpose of this paper is to present the efficacy of an oil-borne varnish applied on treated wood exposed to wea...
M F Natale, J M Vidal
Aesthetic changes of coated thermally modified wood after artificial weathering
2017 - IRG/WP 17-40819
The thermal modification process affects the chemical configuration of the wood matrix improving some physical properties and durability. In addition, the distinctive dark tones of thermally modified timber increase the economic value of several light-coloured species. However, heat-treatment alters the substrates and it could influence in the application of coating products, necessaries to mainta...
R Herrera, J Sandak, E Robles, J Labidi
Effects of exposure time on detection of the behavior of white-rot fungi on Oriental beech wood properties
2017 - IRG/WP 17-10902
The comparison of fungal degradation of Orientalis beechwood by two white-rot fungi was evaluated in this study. Biological, mechanical, and chemical assessments of beech wood were carried out at 30 day interval for 120 days. The results demonstrated that both fungi have greater effects on beech wood during each exposure time. However, Trametes versicolor degraded beech wood more effectively than ...
E Bari, D D Nicholas, K M Ohno
Functional silicones used for wood protection: preliminary study
2017 - IRG/WP 17-30720
Due to worldwide regulation the wood preservation domain is constantly changing. Silicones are used for different industrial applications as hydrophobic agents. This property could enable to reduce water uptake of wood treated with these compounds. Treated wood could then be less prone to dimensional variation and fungal attack, those parameters being driven by variations in wood’s moisture cont...
C Reynaud, F Marchal, F Pochon, M Kutnik
UV-curable coatings developed for aesthetic and biological protection of wood outdoors
2017 - IRG/WP 17-40821
To avoid wood greying, dimensional variations, and degradation by biological agents wood is protected with preservation products and coatings when used outdoors. For some wood species used for cladding, a treatment with a preservation product is required, and is frequently additionally protected with a coating. In this study, Mäder Group developed a new UV-curable coating for outdoors application...
C Reynaud, A S Schuller, M Kutnik, L Podgorski
Exterior paint for the future - Will there be any dry-film preservatives left?
2017 - IRG/WP 17-50332
Wooden houses have a long tradition in several of the Nordic countries. Wood can be protected in various ways; constructional, chemically and by surface treatment. The use of various types of exterior paints as a surface treatment is a common way to prolong the durability of the wood. To further protect the painted surface against growth of fungi and algae, dry-film biocides remains an essential p...
H Jensen, M Sandve, S M Lystvet
Colour changes in unpainted wooden façades – Fifty Shades of Grey
2018 - IRG/WP 18-10903
In Norway the use of weathered unpainted, wooden façades has increased in popularity the last 20 years, both in single family houses as well as in multi-story and non-residential buildings. The benefit of using unpainted wood as façade material can be several: low maintenance costs, low environmental impact and low carbon footprint as well as contemporary and trendy aesthetic appearance.
The va...
K Zimmer, L R Gobakken, O Flindall, M Nygaard
Imports of African logs, do they harbor wood-decaying alien fungi and bacteria that could become a potential threat at temperate latitudes? – First results
2018 - IRG/WP 18-10904
In this project we investigate the potential threat of alien wood-decaying fungal and bacterial species imported to Germany with logs from African countries. In a first approach we analysed fungal species on imported logs by identification of fruit bodies by DNA sequencing of the internal transcribed spacer (ITS) regions ITS1 and ITS2. First results revealed the existence of at least one alien fun...
J Trautner, M Höpken, E Melcher
Interactions between wood polyphenols and detoxification enzymes of the white rot Trametes versicolor
2018 - IRG/WP 18-10906
Wood decay fungi have complex detoxification systems that enable them to cope with secondary metabolites produced by plants. Although the number of genes encoding for glutathione transferases (GSTs) is especially expanded in lignolytic fungi, little is known about their physiological target molecules. In this study, by combining thermal shift assay and affinity crystallography we highlighted inter...
M Schwartz, T Perrot, E Aubert, S Dumarçay, F Favier, P Gérardin, M Morel-Rouhier, G Mulliert, F Saiag, C Didierjean, E Gelhaye
Enhancing Our Understanding of Brown Rot Mechanisms through Catalytic Pretreatment and Cellulase Cocktail
2018 - IRG/WP 18-10909
A catalytic mechanism, described as the “chelator-mediated Fenton” (CMF) mechanism, is proposed to mimic the non-enzymatic action of brown rot fungi. A CMF treatment was used together with an enzymatic cocktail to study how wood was deconstructed and solubilized. This was done in-part to determine if the treatment mimicked the action of brown rot fungi, but also to explore improved treatment p...
S Tabor, L Orjuela, D Contreras, G Alfredsen, J Jellison, S Renneckar, B Goodell
Biocontrol of wood decay insects and nematodes as an alternative to traditional chemical treatments
2018 - IRG/WP 18-10914
The protection of wood has been defined until relatively recently, as the application of a chemical to increase its durability. On the other hand, society is becoming more and more demanding in terms of the use of products which have the minimum ecological impact. This has led many countries to reduce the list of biocidal products that can be used (European Biocides Regulation), therefore it is ne...
L Robertson, J F Galván, F Llinares, R Viñambres, M T de Troya
Efficacy of Xotic Wood Preservative to control termites attack on Pinus patula wood
2018 - IRG/WP 18-10915
This study aimed at evaluating the efficacy of Xotic Wood Preservative on treated wood. Solignum was the experimental standard. The experiment was laid out in a Randomised Block Design carried out as a graveyard trial with 15 samples, 3 treatments and 5 replicates. The results showed that there was significant difference (P<0.05) in weight of the wood after four months of the graveyard trial. Term...
H Jenya, G Meke
Liquefied wood polyols: Ecofriendly bio-based preservative for sustainable protection of wood from Termite attack
2018 - IRG/WP 18-10916
The major problems encountered in both indoor and outdoor utilization of wood are biological decay due to termite. The modification of wood with liquefied wood polyols has been found to be effective against termite attack. The liquefaction of wood aims to utilize woody wastes which are being generated during primary and secondary processing of wood in wood based industry. One of promising approach...
A Kumar, A John, T S Mehra, A K Pandey, S Singh Chauhan
Termite resistance of wood-plastic composites made with acetylated wood flour, coupling agent or zinc borate
2018 - IRG/WP 18-10917
There is little published scientific literature on the laboratory or field testing of wood-plastic composites (WPC) against termite attack. Therefore, the objective of this research was to investigate termite resistance (both laboratory and field) of 5 different extruded WPC blends of 50% western pine wood flour (WF) and high-density polyethylene (HDPE), and untreated pine solid wood. The study in...
R E Ibach, Y S Hadi, C M Clemons, S Yusuf