IRG Documents Database and Compendium


Search and Download IRG Documents:



Between and , sort by


Displaying your search results

Your search resulted in 235 documents. Displaying 25 entries per page.


Algal growth resistance of paints for coating of wood; a laboratory study
1997 - IRG/WP 97-10213
Twelve paints were tested for resistance against algae. In addition, one algicidal compound commercially used for remedial treatments of algal growth on paints was tested for its effectiveness for prevention of algal growth. An agar diffusion bioassay was employed in which paint films on filter paper discs were placed on mineral salt medium and sprayed with an algal suspension containing a mixture...
J Bjurman


FAROX, a novel insect growth regulator for use against wood-boring insects
1995 - IRG/WP 95-30080
The active ingredient in FAROX - fenoxycarb - is a novel insect growth regulator for preventive use against wood-boring insects (Hylotrupes, Anobium and Lyctus). FAROX has the same biological effect as a natural insect growth factor produced by the insect itself. FAROX is tailor-made for insect control; it attacks at the points where the insect should normally be changing its form and blocks these...
A R Valcke


Preliminary observations of the effect of growth ring orientation on the surface checking of flat sawn Southern pine decking
2005 - IRG/WP 05-20313
Checking in decking timber is a serious defect and methods of reducing its severity are required to ensure that wood can compete with alternative decking materials. The first aim of this research was to test the hypothesis that flat sawn Southern pine decking boards with growth rings oriented concave to the exposed surface will develop less severe checking when exposed outdoors than similarly expo...
K Urban, P D Evans


Studies on the effect of salinity on the growth and mortality of Teredinids in Papua New Guinea
1977 - IRG/WP 432
Population fluctuations seen in the teredinid species settling in estuarine waters at Marshall Lagoon over a 3 year period were correlated with the salinity fluctuations to which they had been subjected. From these calculations the salinity range in which the most common species settled was determined. Studies in the aquarium were designed to test the salinity range of these teredinids under contr...
S M Rayner


Suppression of termite feeding by Sudan red 7B
1988 - IRG/WP 1344
Groups of the Formosan subterranean termite, Coptotermes formosanus Shiraki, were fed for 14 days on wood shavings soaked in acetone solutions of one of three concentrations (0, 0.5, or 1%) of the dye, Sudan Red 7B. Groups of marked or unmarked termites were then placed in containers and allowed to feed on undyed wood for 21 days. Dyed termites had lower wood feeding rate, survivorship, and number...
K S Delaplane, L A Bourg, J P La Fage


Ability of heartwood extractives to inhibit the growth of a bacterial symbiont of Teredo navalis
2000 - IRG/WP 00-10369
Shipworms are important destroyers of wood in the marine environment, and wood users have long sought methods for preventing or limiting their attack. While heavy -duty wood preservatives are highly effective against these organisms, there is increasing concern about risks to non-target organisms. This has resulted in a gradual shift away from broadly toxic materials to either alternative material...
C S Love, A R Sipe, S C Cary, J J Morrell


Why don't more people work with Serpula lacrymans nowadays? A discussion of some of the different approaches to experimenting with this unique fungus
1989 - IRG/WP 1383
Remarkably few laboratories are currently investigating this well-known fungus. Not only has it failed to gain acceptance as a standard test organism (for wood preservative evaluation) in many countries, but is also sometimes excluded from pure research studies when it ought to be an obvious first choice as a representative basidiomycete. This paper discusses some different approaches that have be...
J D Thornton


Antagonistic effects of Dacrymyces stillatus against growth of other fungi
1991 - IRG/WP 2363
The antagonistic effects in dual cultures on malt extract agar of 5 wood decay fungi and the antagonistic effects of Dacrymyces stillatus against 1 mould fungus and 1 blue stain fungus were determined. Dacrymyces stillatus was the only fungus which exhibited clear antagonistic effects. The effects of Dacrymyces stillatus against the different test fungi varied however to a great extent. Dacrymyces...
J Bjurman


Mould growth and permeability in relation to wet-storage
1989 - IRG/WP 1414
The positive influences of wet-storage of roundwood to avoid attack by blue stain fungi and insects and to avoid cracking of wood during storage are well documented. Comparatively little information is, however, available on the effects on microbial susceptibility of the material after the storage period. The permeability of the wet-stored and the non-wet-stored material was determined. Wood block...
J Bjurman, E L Holappa


Evaluation of fungi isolated from the galleries of the striped ambrosia beetle Xyloterus lineatus (Ol.) (Col., Scolytidae)
1995 - IRG/WP 95-10092
Fungi from the galleries of the striped ambrosia beetle Xyloterus lineatus (Trypodendron lineatum) (Ol.) found in spruce logs were studied. The following fungi were isolated and identified: Trichoderma harzianum Rifai, the yeast Pichia anomale Hansen (Kurzman), the blue-stain fungus Ceratocystis piceae (graphium) (Münch) Bakshi and a fungus closely similar to Ceratocystis araucariae (anamorph). T...
G Babuder,F Pohleven


Effects of CCA treatment on settlement and growth of barnacles under field conditions
1998 - IRG/WP 98-50116
As part of a field experiment at seven European marine sites evaluating the effects of CCA treatments on non-target marine organisms, panels treated to nominal loadings of 12, 24 and 48 kg/m3 CCA were exposed at marine sites around the coast of Europe. Within two weeks of exposure, a heavy settlement of barnacles took place on the panels exposed intertidally in France. The intensity of settlement ...
S M Cragg, C Brown, R M Albuquerque, R A Eaton, P Goulletquer


The effect of chitosan on the growth and physiology of two wood inhabiting fungi
2006 - IRG/WP 06-10590
The effect of chitosan on the wood inhabiting fungi Sphaeropsis sapinea and Trichoderma harzianum was evaluated at cellular level. Increasing concentrations of chitosan caused an increase in the amount of peroxide in cultures of S. sapinea, which was accompanied by a simultaneous decrease in superoxide. The same effect was not observed in T. harzianum. The growth of both fungi was inhibited when h...
D Vesentini, T Singh


Effects of two insect growth regulators (IRGs) on Microcerotermes diversus (Silvestri) (Isoptera: Termitidae) in Southwest Iran
2006 - IRGWP 06-10601
Microcerotermes diversus (Silvestri) is the most economically damaging termite species in structures in southwest, Iran. One safe control strategy that may reduce the subterranean termite damage in buildings is the use of IGRs in a suitable bait matrix. The effects of two juvenile hormone analogues, Admiral (Pyriproxyfen ) and Farox on M. diversus were evaluated over a range of concentrations ( 10...
B Habibpour, M S Mossadegh, G Henderson, S Moharramipour


Seasonal response of feeding, differentiation, and growth in the eastern subterranean termite Reticulitermes flavipes (Kollar) in Wisconsin
2007 - IRG/WP 07-10604
In termites, differentiation plasticity in undifferentiated Reticulitermes progresses with growth stages from larvae to workers, which may then differentiate into soldiers, winged nymphs, or neotenics. Although studies have been done on seasonality of the termite life cycle, data appears to vary from location to location. Reticulitermes populations in Wisconsin appear to behave slightly differentl...
R A Arango, F Green III, G R Esenther


Growth and succession of mould on commercial paint systems in two field sites
2007 - IRG/WP 07-30421
Discolouring fungi reduce the service life of coated wooden claddings in façades and increase the total cost of ownership due to shorter maintenance intervals. It is of major importance to find paint systems for wood which are durable and have a high resistance to mould growth. A total of 15 paint systems from 9 different manufacturers were exposed on two field sites, Sørkedalen and Birkenes, ...
L Ross Gobakken, K M Jenssen


Effects of caffeine on growth of wood-decaying fungi
2007 - IRG/WP 07-30427
The wide-used triazoles alter the biosynthesis of ergosterol leading to a disruption of fungal membrane functions. The aim of this study was to investigate the effects of another cell wall perturbing agent, caffeine, in combination with propiconazole on the growth of wood-decaying fungi. 10 mM caffeine inhibits totally the growth of five fungal species. The obtained results showed that caffeine ha...
S Lekounougou, J P Ondo, J P Jacquot, G Nevers, P Gérardin, E Gelhaye


Copper fixation in ACQ-D treated Chinese fir at various temperature and relative humidity conditions
2007 - IRG/WP 07-30436
In this study, the effect of different conditions of temperature, relative humidity, and duration of post-treatments on accelerating copper fixation in ACQ-D treated Chinese fir wood blocks was investigated. The conditions include the combination of three temperatures (21, 50, and 70?) and two relative humidity levels (20% and 80%), also include four temperatures (50, 70, 90, and 110?) without con...
Jinzhen Cao, Lili Yu


The influence of pentachlorophenol on mycelial growth of wood decay fungi Trametes versicolor, Grifola frondosa, Hypoxylon fragiforme, and Coniophora puteana
2007 - IRG/WP 07-30437
Polychlorinated phenols have been one of the most commonly used biocides. In recent time they have been increasingly eliminated from the marked. Because of their high stability, they are still present in numerous products, including impregnated wood. In our research we studied in vitro the influences of pentachlorophenol and/or sodium pentachlorophenolate on mycelial growth of four wood degrading ...
F Pohleven, B Boh


Mold resistance of heat-treated wood
2007 - IRG/WP 07-40358
The resistance of heat-treated sugi sapwood against three mold fungi was evaluated. Wood specimens were first subjected to heat treatments at 180 and 220ºC for 2 and 4 hours. Mold growth on the surface of the specimens was measured 1, 2, 4 and 6 weeks after the inoculation with the fungi in laboratory conditions. Laboratory decay tests were performed using two brown and white-rot fungi along with...
S N Kartal


Control of Moisture Content in Wood Materials for Mold Growth
2007 - IRG/WP 07-10630
Mold growth on wood materials is a major concern for house owners, as it can cause health and aesthetic problems. Mold fungi, present everywhere, usually appear as black or gray patches on wood surfaces in humid environments, and are common in houses. Like any living organism, molds need food, water, oxygen, and a specific temperature range in order to grow. To avoid mold growth on wood materia...
Dian-Qing Yang


Difficulties applying Heat Treatment according to ISPM No. 15, when fast growth species are used
2007 - IRG/WP 07-40386
In 2002, the Interim Commission on Phytosanitary Measures (ICPM) adopted the International Standard for Phytosanitary Measures (ISPM) No. 15 (Guidelines for regulating wood packaging material in international trade). Two treatments are recognized: Heat Treatment (HT), in which wood must be heated to a core temperature of 56°C for 30 minutes, and fumigation with methyl bromide. As the last treatme...
O Encinas, J. I Briceño


Influence of ring width and wood density on durability of oak heartwood
2008 - IRG/WP 08-10639
Oak (Quercus sp.) is considered as one of the most durable European wood species. The most important factor influencing oak durability was extractive content. In our work, we were interested in if oak-wood durability is affected by ring-width and related density. Therefore, oak heartwood specimens made of boards with different ring widths were exposed to five different fungal species Daedelea quer...
M Humar, P Oven, F Pohleven


Water Absorption of Various Building Materials and Mold Growth
2008 - IRG/WP 08-10657
Mold growth is a major problem for house owners, as it often occurs on the surface of building materials in damp houses. The principal method to control mold growth on building materials is to prevent water penetration into the materials. A study was recently conducted to determine water absorption rates of different wood species and panel materials used as building materials, when water intrusi...
Dian-Qing Yang


Natural durability of fast growth plantation Eucalyptus grandis Hill, ex Maiden
2008 - IRG/WP 08-10660
One of the fast growing species cultivated in Uruguay of mayor economical importance is Eucalyptus grandis. Physical and mechanical properties of juvenile and mature wood from different regions have been deeply studied. However, since no scientific data of natural durability of this specie has been reported, natural durability of E. grandis from two sites (Rivera and Rio Negro) was evaluated. Two ...
S Böthig, A Sánchez, J Doldán


A preliminary note on the role of moisture absorption rate in durability assessment
2008 - IRG/WP 08-20383
The rate of moisture uptake was studied in 15 wood species using vermiculite at varying moisture levels as the exposure medium. As might be expected, moisture uptake varied widely among the species studied. While some of the more durable wood species were also resistant to moisture uptake, this was not always true. The results are discussed in relation to performance in under varying environmenta...
J J Morrell, L P Francis


Previous Page | Next Page