Your search resulted in 153 documents. Displaying 25 entries per page.
Carbon quantum dots as a fungicide and its applications in wood
2025 - IRG/WP 25-20754
In this work, we synthesised nitrogen-doped carbon quantum dots (CQDs) via a microwave assisted method. CQDs with proper structure showed excellent anti-fungal effects against both brown (Postia placenta, Pp) and white rot decay fungi (Trametes versicolor, Tv) on wood. The underlying anti-fungal mechanisms of CQDs on wood were further elucidated. We found that positively charged nano-sized CQDs pr...
X Zhao, Z Zhang, M Zhou, J Cao
Investigation of a commercial fire-retardant additive on particleboard properties
2025 - IRG/WP 25-20755
Fire resistance of wood-based panels is in addition to mechanical and sorption properties, an important property when considering its usability for construction applications. Increased fire resistance is achieved through fire retardant addition during panel production or by spraying fire-retardant on already finished panel. A potential downside of fire-retardant addition during panel production ca...
D Jones, S Medved, M Lawther
Sustainable and environmentally friendly bio-based protection against fire
2025 - IRG/WP 25-20756
Flame-retardant agents are used to confer fire resistant properties with effects strongly dependent on their ability to form char during the thermal degradation. The char coats the polymeric materials and provides a good barrier against heat and oxygen diffusion, thus reducing the combustion rate of the polymeric materials. Halogenated agents that are used today are toxic and may cause severe heal...
M Tanase-Opedal, A Larsson, P O Flaete
Predicting weather resistance of Recoated Outdoor Wood by Near Infrared Diffuse Reflectance Spectroscopy
2025 - IRG/WP 25-20757
Wood exposed to the outdoors causes slow degradation. One wood treatment to retain this degradation is paints and stains, and recoating is essential process for these coated wood products to achieve a long service life. We investigated that possibility of using near infrared spectroscopy to estimate repair condition and weather resistance of recoated outdoor wood. The specimens used for recoating ...
M Murai, M Itani, K Isoda
Curing Behaviour of Bio-based Phenol Formaldehyde Resin and the Durability Performance of Treated Wood
2025 - IRG/WP 25-20758
The aim of the study is to investigate the curing behaviours of bio-based PF resins treated Japanese Cedar (Cryptomeria japonica). Compared to conventional wood preservatives such as metal-based ACQ, bio-based PF resin was more environmentally-friendly and can store more plant-based carbon inside treated wood. However, all these preservatives have the risk of being leached out. This study conducte...
Y-S Lee, P-Y Kuo
Enhancing the Effectiveness of Penflufen by using a Plant Booster
2025 - IRG/WP 25-20759
Penflufen (Preventol® A 800) is a modern pyrazole fungicide which has been approved by the US EPA for the use in wood protection in 2018. Penflufen is an inhibitor of the succinate dehydrogenase (SDHI). It is highly efficient against wood decaying basidiomycetes fungi. In the European standard efficacy test EN 113/ EN 84, penflufen is controlling both brown rot and white rot fungi at the low rete...
D Messaoudi, A Robert, P Meckler, T Jaetsch
The Impact of Drying Techniques on the Quality of Thermally Modified Wood
2025 - IRG/WP 25-30813
The wood drying technique applied before loading the dry wood into the ThermoWood® kiln may affect its properties. For this purpose, Scots pine (Pinus sylvestris) boards were first dried through three drying methods, including radio-frequency/vacuum (RF/V), mild, and moderate conventional drying, and then loaded into a ThermoWood® kiln for thermal modification at 212 °C for 3 hours according to...
M Ghorbanian Far, N Sharifi, A Nikoutadbir, A Tarmian, M Humar
The non-energy utilization of low-quality wood from the invasive species Prunus serotina
2025 - IRG/WP 25-30814
Alien invasive species in Europe, such as Prunus serotina, can significantly impact ecosystem structure and function. This species provides low-quality timber, which is most often used for energy purposes in the form of biomass. In the era of policies focused on a circular economy, seeking methods to extend the life cycle of raw materials and wood products is necessary. For this purpose, the wood ...
W Perdoch, P Kołwzan
Decay resistance of thermally modified Eucalyptus grandis in closed and open systems
2025 - IRG/WP 25-30815
Thermal modification has been successfully used to improve the durability of Eucalyptus wood from fast-growing forests. Although it is the most common type of modification process, there are some fields for studies on thermally modified wood, particularly about the comparison between processes in closed and open systems. This work aimed to analyse the effect of thermal modification in closed and o...
D C Batista, A C Oliveira Rupf, M Wentzel, C Brischke, H Militz
Chestnut tannin-furfurylic resins for wood preservation: influence of the proportion of tannins as a copolymer
2025 - IRG/WP 25-30816
Tannin, which is present in all plants, is the most abundant polyphenol globally and can be extracted using water or organic solvents such as acetone, ethanol and methanol. Tannins are classified into two categories: condensed tannins (catechin-based polymers) and hydrolysable tannins (sugar esters with galloyl units). Previous studies have demonstrated its potential as a raw material for modifyin...
J V Dorini-Falavinha, C Gerardin-Charbonnier, P Cademartori
Novel treatments of solid wood - studies into the use of imidazole and succinimide
2025 - IRG/WP 25-30817
Recent activities have focussed on the use of ionic liquids (ILs) in wood treatments and bioprocessing. Most ILs are based on imidazolium systems, so it was decided to investigate the potential of imidazole as a treatment, along with another heterocyclic compound, namely succinimide. Thus, modification of Scots pine sapwood (Pinus sylvestris L.) with heterocyclic compounds, imidazole and succinimi...
D Jones, A Scharf, H Dernegård, J Oja, S Duarte, J Levanić, M Humar
Enhanced Termite Resistance of Low Durability Fast Growing Teak Wood by Non-Biocide Treatments Based on Chemical and Thermal Modification
2025 - IRG/WP 25-30818
Short rotation teak as a fast-growing tree can be considered as a renewable material resource for the future green economy. However, short rotation teak wood is susceptible to biodeterioration, particularly to termite attack. The objective of this work was to investigate the effect of chemical and thermal treatment on resistance of sapwood, transition wood, and heartwood of short rotation teak aga...
R Martha, K Candelier, M-F Thévenon, B George, I S Rahayu, W Darmawan, P Gérardin
Furfurylation of wood with white pocket rot caused by Porodaedalea chrysoloma
2025 - IRG/WP 25-30819
Japanese larch (Larix kaempferi [Lamb.] Carr) is one of the major softwood plantation species in Japan. This tree is an important source of building materials or civil engineering that require strength. However, aged larch trees often suffer damage caused by wood decay fungi under natural conditions. Porodaedalea chrysoloma (Fr.) Fiasson & Niemelä is a basidiomycete and a stem heart rot fungal sp...
Y Mori, Yamashita, Y Ota, M Kiguchi
CIOL Wood – Industrialization of Sustainable Wood Products: Progress and Prospects
2025 - IRG/WP 25-30820
CIOL® is an innovative, low-cost, non-toxic wood modification system designed to replace traditional, non-sustainable treatments used for wood protection. Since our last contribution in 2023, significant progress has been made in the development of CIOL® towards industrial-scale production. This update presents new results on fire protection, mechanical properties, and the continued scaling of t...
J Biørnstad
The impact of common fire retardancy salts and minerals on further properties of wood
2025 - IRG/WP 25-30821
Wood has become an increasingly important construction material. To ensure fire safety, fire retardants are widely applied. Recent research focuses on environmentally friendly fire retardants with strong fixation. Phosphate-based salts like diammonium hydrogen phosphate show high fire protection potential but are highly leachable due to their good water solubility. As a newer trend mineralisation ...
T Franke, T Volkmer
Unlocking the Potential of Dairy Coproducts in Wood Modification
2025 - IRG/WP 25-30822
The production of dairy coproducts, such as whey (sweet or acid) and whey ultrafiltration permeate, has significantly increased in response to the rising global cheese consumption. Proteins found in by-products are purified for human nutrition. However, upcycling lactose, which is the major compound of cheese by-products, is more challenging due to the high cost of upcycling processes. Furthermore...
A Keralta, J Karthäuser, J Winninger, J Chamberland, M-J Dumont, V Landry, H Militz
Mineral-wood composites with improved fire properties and durability prepared through MgCO3-based mineralization
2025 - IRG/WP 25-30823
New mineral-wood composites that demonstrate improved fire properties and higher resistance to selected fungi have been prepared using an environmentally-friendly mineralisation process involving impregnation with an aqueous magnesium acetoacetate solution. MgCO3-based compounds are formed in situ, deep within the wood’s structure. We show that the new mineralisation method overcomes wood’s lo...
A Pondelak, N Knez, S D Škapin, M Humar, A S Škapin
Effect of Deep Eutectic Solvent Pretreatment on Properties of Densified Wood
2025 - IRG/WP 25-30824
Densified wood is preferable for structural applications because of its excellent mechanical properties and sustainability, but the fixation of its compression deformation and the prevention of water-induced mechanical deterioration remain challenging. Herein, an eco-friendly and highly efficient method was designed for producing dimensionally-stable densified wood, including deep eutectic solvent...
Y Ran, W Wang, J Cao
Properties of plasma etched super black wood
2025 - IRG/WP 25-30825
Super-black materials have very low reflectivity due to structural absorption of light. They are attracting considerable scientific and industrial attention because of their important applications in many fields including astronomy, photovoltaics, and optical science, amongst others. We have developed the first super-black material from wood by etching transverse basswood (Tilia americana L.) surf...
K J Cheng, X Xu, V A Hernandez, P D Evans
Plasma Modification of Basswood Creates Super-Black Wood
2025 - IRG/WP 25-30826
A super-black wood with low reflectivity in the UV/Vis range is created by plasma modifying transverse basswood surfaces. Here the super-black wood is characterised, the process used to make it is described and its possible practical uses are discussed. Wood samples are exposed to oxygen glow-discharge plasma. Transverse surfaces exposed to high-energy plasma have a deep-black velvety appearance. ...
K J Cheng, D Feng, M Turner, L Schmidt, P D Evans
Process Development in Continuous Wood Densification and the Influence of Ionic Liquids on Set-Recovery and Mechanical Properties
2025 - IRG/WP 25-30827
The densification of wood significantly enhances its mechanical properties, making low-density species more viable for high-performance applications. However, challenges such as set-recovery (SR) and production speed hinder large-scale adoption. This study investigates continuous surface densification using a custom-built belt press and examines the effect of chemical pre-treatment with ionic liqu...
D Jones, A Scharf, B Neyses, D Sandberg
Influence of plasma treatment on the coatability of wood primer with a topcoat for exterior use
2025 - IRG/WP 25-30828
The coatability of oil, or of solvent-borne alkyd resin wood primers with waterborne acrylic finish is the subject of much debate, but not much information can be found in the scientific literature on this topic. The aim of our study was therefore to evaluate the adhesion strength of the waterborne acrylic coating on oiled wood or wood with a solvent-based alkyd primer and to test the recoatabilit...
M Petrič, L Albreht, N B Štrus, E Keržič, M Pavlič, J Žigon, S Dahle
Enhancing strength, fire and biological resistance of wood through structural and chemical modification
2025 - IRG/WP 25-30831
Wood, a renewable and versatile biopolymer, has been a fundamental material to construct traditional and advanced composites for building construction, furniture, transparent composites, and various other applications. Despite its many advantages, including its aesthetic appeal, workability, and relatively low cost, wood possesses inherent limitations such as susceptibility to biological, flame an...
R Abouzeid, M S Koo, Q Wu
Modification of Beech Wood by Furfurylation with Chestnut (Castanea sativa) or Acacia (Acacia mearnsii) Tannins for Protection Against Subterranean Termites
2025 - IRG/WP 25-30832
Environmental concerns about tropical deforestation have emphasised the need to source wood from sustainably managed forests. At the same time, competition from alternative materials has amplified the demand for high-quality wood-based products that meet contemporary expectations. To date, most preservative treatments have involved impregnating wood with biocides, often derived from petrochemicals...
J V Dorini-Falavinha, K Candelier, P H Gonzales De Cademartori, C Gérardin-Charbonnier
Evaluation of oak bark extracts as bio-based preservative agents in wood protection
2025 - IRG/WP 25-30833
Bark represents a major by-product of the forestry sector and is often referred to low value uses such as combustion for energy, soil mulching or animal bedding. Nevertheless, bark contains a wide array of bioactive constituents, offering considerable potential for transformation into value-added wood protection agents. Developing sustainable wood treatments based on these natural compounds aligns...
R Herrera, A Selmanovic, F Poohphajai, C Peña, A Sandak