Your search resulted in 650 documents. Displaying 25 entries per page.
Relationships between deterioration part and structural performance in wooden houses
2023 - IRG/WP 23-50376
Based on the survey examples, there are four patterns of deterioration that tend to occur in plywood bearing walls of wooden houses in Japan. The first is a pattern in which wall is in a whole deterioration. It is a no damage wall or test specimen. The second is a pattern in which only the sill is deteriorating. It is caused by moisture or termites from ground to the base. In addition, there is a ...
Y Ota, H Ishiyama, S Okamoto
Improving American Hardwoods Sustainability, Durability and Markets
2023 - IRG/WP 23-50378
The American hardwood industry, which dates back to the first European settlers, has a wealth of experience processing the native hardwoods of North America. The US hardwood resource is mainly located in the eastern United States, from Maine in the North to the Gulf of Mexico in the South and westwards to the Mississippi Valley. The USA has more temperate hardwood species than any other world regi...
D Brooks, M Snow
Enhanced durability of bio-based materials for green building
2023 - IRG/WP 23-50382
Wood protection technologies provide tools to enhance the durability of bio-based materials for green building. Both wood and related bio-based material are regarded as eminent for green building. It allows to underpin several of the United Nations sustainable development goals and is regarded critical for the Green Deal objectives of the EU. Nevertheless, to enhance the potential it needs to be b...
J Van Acker, L De Ligne, J Vand den Bulcke
Australian timber durability research needs
2023 - IRG/WP 23-50385
Australia was once a world leader in timber durability research, but prolonged disinvestment resulted in a gradual decline in capacity. Forest and Wood Products Australia recognized this problem and supported the development of the Centre for Timber Durability and Design Life to help reverse this decline and begin to educate the next generation of Australian researchers. The Centre is a collabor...
J J Morrell
Wood above ground project – Results and future plans
2024 - IRG/WP 24-11041
In 2000, the Danish Technological Institute (DTI) initiated an extensive study to investigate the natural durability of wood. The study involved exposing wood in various orientations to assess its performance. A total of 35 wood material types were exposed at DTI test site in Taastrup, Denmark. Moisture content (MC) was measured through weighing for the initial five years, decay was assessed follo...
A W Christof, R Digaitis, P Fynholm, J Stenbaek, N Morsing, B Lindegaard
Unlocking the potential of paulownia in Malaysia: Durability assessment to mold
2024 - IRG/WP 24-11043
Paulownia is one of the species included in the plantation program in Malaysia due to its fast growth (three to four years) and excellent properties suitable for wide application including furniture, biofuel, musical instruments, and decoration. However, data on its durability to biodegradation is scarce, especially for tropical usage. In this study, a paulownia clone known as Revotropix Paulownia...
S Lipeh, T Khadiran, N A Siam, R Jalil, N F N M Isa
On the use of miniaturized wood specimens in fungal decay experiments – mini-blocks versus EN 113 test specimens
2024 - IRG/WP 24-11044
Preliminary evaluation and classification of wood durability against decay fungi using laboratory monoculture experiments has been a longstanding practice because these tests offer quicker results than field tests. Various methods, including miniaturized specimen formats and different incubation periods, have been explored to expedite decay processes and assess wood preservation efficacy. The 'min...
C Brischke, G Alfredsen
Studies on the treatability of selected pine species and corresponding efficacies of a new non-biocidal treatment
2024 - IRG/WP 24-20721
Wood decay caused by fungi may reduce the service life of wood in outdoor applications. Since moisture conditions in wood occur as one of the most crucial parameters for fungal decay, chemical modifications, which affect the latter, may increase the resistance of wood against such organisms. Usually, pine sapwood is easier to chemically treat than heartwood, as the former generally shows good perm...
T R da Silva Lins, L Emmerich, H Militz, P H Gonzales de Cademartoni, R J Klizke, M Pereira da Rocha
The potential of Wacapou (Vouacapoua americana) extracts to develop new biobased protective solutions for white woods
2024 - IRG/WP 24-20724
The valorisation of Amazonian wood residues into active chemical compounds could be an eco-friendly, cost effective and valuable way to develop wood preservatives formulations in order to enhance the decay and termite resistances of low durable wood species, by impregnation processes. Wacapou (Vouacapoua spp., Fabaceae) is a well-known Guianese wood species for its use in local wood construction ...
E Kieny, K Candelier, L Milhe, Y Estevez, C Sophie, R Lehnebach, J Damay, D Florez, E Hoël, M-F Thevenon, J Bossu
Elevated pressure hybrid wood modification: Synergistic effects on durability performance
2024 - IRG/WP 24-20725
The combination of different wood modification technologies to obtain improved performance is increasingly receiving attention in research. In this study, Scots Pine was impregnated with furfuryl alcohol (FFA) in pure aqueous 20, 40 and 60% solution strength without adding any catalyst. In a second step, the FFA was polymerized while simultaneously performing thermal modification in a closed syste...
P Klaas, D Jones
Preservative properties of boron-treated paulownia wood
2024 - IRG/WP 24-20729
This research was performed to investigate the preservative retention properties of paulownia wood treated using boric acid/borax at mass ratio of 1:1.8. Different portion of paulownia wood (top, middle, bottom) were used as a sample throughout of this study. In the treatment process, the paulownia wood was dipped in the 1% boric acid/borax solution for 1, 24, 72, 120 and 240 hours to achieve requ...
T Khadiran, M A M Abdullah, S Lipeh
Properties of thermal modified wood of Pinus pinaster, Pinus radiata and Pinus sylvestris from Galicia, Spain
2024 - IRG/WP 24-30800
This paper provides the results of a research about the properties of thermal modified wood of maritime pine (Pinus pinaster Ait.), radiata pine (Pinus radiata D. Don) and Scots pine (Pinus sylvestris L.) from Galicia, Spain, thermal treated in the industrial vacuum-heat autoclave plant of FINSA group in Galicia, Spain. These three pine wood species are used in different solid products but due the...
D Lorenzo, J Benito, J Arancon, J Crespo
Physical, durability and chemical characterization of Gmelina arborea (Roxb.) wood treated with lactic acid
2024 - IRG/WP 24-30803
The increase in demand for durable wood has drawn attention to the use of fast-grown plantation species across the globe. Chemical modification was used to treat Gmelina arborea wood with lactic acid for property enhancement. The treated samples were obtained from two different ages of 15 and 10 years and sawn into (20 x 20 x 60) mm and (20 x 20 x 20) mm for physical, durability and chemical chara...
T O Akinwamide, J M Owoyemib, E A Iyiolac
Preliminary investigation of the durability and performance of 1,3-dimethylol-4,5-dihydroxyethylene urea (DMDHEU) treated aspen strandboard
2024 - IRG/WP 24-30804
Wood modification technologies are growing in popularity because of their potential to improve wood properties by permanent covalent chemical modifications rather than chemical impregnation. These features can be utilized in wood composites to help improve dimensional stability and composite resistance to fungal decay. In this study, 1,3-dimethylol-4,5-dihydroxyethylene urea (DMDHEU) was used to m...
S Johnson, F Kamke, G Presley
Influence of the substitution of phenol with lignin cleavage products in phenol-formaldehyde impregnation resins for wood modification on the fungal decay resistance and impregnation depth
2024 - IRG/WP 24-30805
The impregnation modification of wood with phenol-formaldehyde (PF) resins increases the woods dimensional stability and resistance against fungal decay. However, to decrease the usage of non-renewable resources, the substitution of phenol has been a topic of scientific interest. Lignin is a currently underutilized resource with a chemical structure that contains phenolic units. For adhesive appli...
J Karthäuser, L Tarentino, A Treu, H Militz, G Alfredsen
Citric acid and sorbitol treatment: A comparative study of Canadian and Norwegian species
2024 - IRG/WP 24-30806
Dimensional instability can reduce the competitiveness of wood in exterior applications such as cladding and decking. The objective of this work was to evaluate the dimensional stability of permeable and refractory softwoods from Europe and North America modified via a sorbitol and citric acid treatment. White spruce and Norwegian spruce, refractory species, and jack pine and Scots pine, relativel...
D Schorr, Erik Larnøy, R Stirling, G Boivin
Durability of acetylated beech (Fagus sylvativa L.) laminated veneer lumber (LVL)
2024 - IRG/WP 24-30807
Beech (Fagus sylvatica L.) is one of the most abundant hardwood species in Germany and other European countries. It has been demonstrated as suitable raw material for structural products, like laminated veneer lumber (LVL). However, the use of these products is typically restricted to interior applications due to its high susceptibility to weathering and biological attack. Therefore, acetylation w...
M Slabohm, H Militz
Bio-durability and weathering performances of cardanol-treated wood
2024 - IRG/WP 24-30809
Cardanol is an excellent insecticide, fungicide, and termiticide derived from thermally treated cashew nutshell liquid (CNSL) and has been extensively explored in the chemical industry and for medicinal uses. However, its potential for wood protection remains unexplored. This study aims to understand the bio-durability and weathering properties of cardanol-treated wood. The southern pine and yello...
L Liang, McDonald, A G, L Cai
International joint field trial on the moisture performance of wood – Set up and first results
2024 - IRG/WP 24-40996
Wood durability to decay stems from its inherent resistance to fungi resistance to fungi. In this regard, wood's ability to withstand moisture uptake plays an important role as the lower threshold for wood decay is a moisture content of 25%. However, the aspect of moisture resistance is not yet sufficiently emphasized as a durability factor, both in the assessment of durability as a material prope...
C Brischke, et al. (33 co-authors)
Evaluation of the water exclusion ability and inherent bioactivity of heartwood against decay in Japanese and European wood species via above-ground exposure and water absorption tests
2024 - IRG/WP 24-40998
The natural durability of wood has been thought to mainly depend on bioactive extractives and the water exclusion ability. To clarify the contribution of each factor to wood durability, above-ground exposure tests were conducted on Japanese and European wood species. A double-layer test was carried out using heartwood specimens of four wood species, i.e., Japanese cedar, Japanese cypress, Scots pi...
T Osawa, R Noda, K Yamamoto
Service life of poplar, a low durability hardwood
2024 - IRG/WP 24-41007
Hybrid poplar is the most common plantation hardwood of the temperate climate zone and is complementary to natural stands of aspen with mainly plantations in Europe and China. Poplar wood has been considered as a valid alternative for many of the construction applications of softwoods especially when considering engineered wood products.
The natural durability of hybrid poplar is low and for a ra...
J Van Acker, X Jiang, L De Ligne, J van den Bulcke
Performance of Douglas-fir cross laminated timber (CLT) subjected to elevated humidity in a ground proximity field test for 6 years
2024 - IRG/WP 24-41010
The ability of insecticidal soil drenches or spray-on insecticide/fungicide treatments to protect mass timber elements exposed in a high moisture environment but out of direct soil contact was assessed using a modified AWPA ground proximity test established in 2017. Three-ply Douglas-fir CLT pieces measuring 305 x 355 x 105 mm (L x H x W) were installed at the Harrison Experimental Forest (HEF) (S...
M E Mankowski, J J Morrell, T G Shelton, G T Kirker
Field facility for conducting wood durability tests at LSU Agricultural Center
2024 - IRG/WP 24-41012
Efforts by Louisiana State University Agricultural Center (LSU AgCenter) to conduct wood durability research on C. formosanus and other wood-related topics, have led to establishing three field research sites to test wood products against Formosan subterranean termites (New Orleans, La), and native subterranean termites (Franklinton, LA), and to test utility poles for outdoor exposure, decay resis...
Q Wu, J Curole
Durability of Malaysian plybamboo to mold
2024 - IRG/WP 24-41014
Durability of 3-layer plybamboo fabricated from two Malaysian bamboo species, Gigantochloa levis (beting) and Gigantochloa scortechinii (semantan) using three different adhesives - urea formaldehyde (UF), melamine urea formaldehyde (MUF) and phenol resorcinal formaldehyde (PRF) was evaluated in this study. Samples were exposed to the mold, Aspergillus brasiliensis for 4-week following the ASTM D44...
S Lipeh, A Mustapha, A S Yusoh, M K A Uyup
The durability and mechanical properties of 40 years old Black locust poles
2024 - IRG/WP 24-11042
This study investigates the durability and mechanical properties of 40-year-old black locust (Robinia pseudoacacia) poles harvested from a vineyard in Slovenia. Wood from these poles was compared to recently harvested black locust wood to determine possible reuse options. Visual inspection, hyperspectral imaging, and laboratory tests were conducted to assess decay, density, mechanical properties, ...
M Humar, J Malik, J Levanic, D Krzisnik, E Kerzic, B Lesar