Your search resulted in 175 documents. Displaying 25 entries per page.
The effect of chitosan on the growth and physiology of two wood inhabiting fungi
2006 - IRG/WP 06-10590
The effect of chitosan on the wood inhabiting fungi Sphaeropsis sapinea and Trichoderma harzianum was evaluated at cellular level. Increasing concentrations of chitosan caused an increase in the amount of peroxide in cultures of S. sapinea, which was accompanied by a simultaneous decrease in superoxide. The same effect was not observed in T. harzianum. The growth of both fungi was inhibited when h...
D Vesentini, T Singh
Effects of two insect growth regulators (IRGs) on Microcerotermes diversus (Silvestri) (Isoptera: Termitidae) in Southwest Iran
2006 - IRGWP 06-10601
Microcerotermes diversus (Silvestri) is the most economically damaging termite species in structures in southwest, Iran. One safe control strategy that may reduce the subterranean termite damage in buildings is the use of IGRs in a suitable bait matrix. The effects of two juvenile hormone analogues, Admiral (Pyriproxyfen ) and Farox on M. diversus were evaluated over a range of concentrations ( 10...
B Habibpour, M S Mossadegh, G Henderson, S Moharramipour
Seasonal response of feeding, differentiation, and growth in the eastern subterranean termite Reticulitermes flavipes (Kollar) in Wisconsin
2007 - IRG/WP 07-10604
In termites, differentiation plasticity in undifferentiated Reticulitermes progresses with growth stages from larvae to workers, which may then differentiate into soldiers, winged nymphs, or neotenics. Although studies have been done on seasonality of the termite life cycle, data appears to vary from location to location. Reticulitermes populations in Wisconsin appear to behave slightly differentl...
R A Arango, F Green III, G R Esenther
Growth and succession of mould on commercial paint systems in two field sites
2007 - IRG/WP 07-30421
Discolouring fungi reduce the service life of coated wooden claddings in façades and increase the total cost of ownership due to shorter maintenance intervals. It is of major importance to find paint systems for wood which are durable and have a high resistance to mould growth. A total of 15 paint systems from 9 different manufacturers were exposed on two field sites, Sørkedalen and Birkenes, ...
L Ross Gobakken, K M Jenssen
Effects of caffeine on growth of wood-decaying fungi
2007 - IRG/WP 07-30427
The wide-used triazoles alter the biosynthesis of ergosterol leading to a disruption of fungal membrane functions. The aim of this study was to investigate the effects of another cell wall perturbing agent, caffeine, in combination with propiconazole on the growth of wood-decaying fungi. 10 mM caffeine inhibits totally the growth of five fungal species. The obtained results showed that caffeine ha...
S Lekounougou, J P Ondo, J P Jacquot, G Nevers, P Gérardin, E Gelhaye
The influence of pentachlorophenol on mycelial growth of wood decay fungi Trametes versicolor, Grifola frondosa, Hypoxylon fragiforme, and Coniophora puteana
2007 - IRG/WP 07-30437
Polychlorinated phenols have been one of the most commonly used biocides. In recent time they have been increasingly eliminated from the marked. Because of their high stability, they are still present in numerous products, including impregnated wood. In our research we studied in vitro the influences of pentachlorophenol and/or sodium pentachlorophenolate on mycelial growth of four wood degrading ...
F Pohleven, B Boh
Mold resistance of heat-treated wood
2007 - IRG/WP 07-40358
The resistance of heat-treated sugi sapwood against three mold fungi was evaluated. Wood specimens were first subjected to heat treatments at 180 and 220ºC for 2 and 4 hours. Mold growth on the surface of the specimens was measured 1, 2, 4 and 6 weeks after the inoculation with the fungi in laboratory conditions. Laboratory decay tests were performed using two brown and white-rot fungi along with...
S N Kartal
Control of Moisture Content in Wood Materials for Mold Growth
2007 - IRG/WP 07-10630
Mold growth on wood materials is a major concern for house owners, as it can cause health and aesthetic problems. Mold fungi, present everywhere, usually appear as black or gray patches on wood surfaces in humid environments, and are common in houses. Like any living organism, molds need food, water, oxygen, and a specific temperature range in order to grow. To avoid mold growth on wood materia...
Dian-Qing Yang
Difficulties applying Heat Treatment according to ISPM No. 15, when fast growth species are used
2007 - IRG/WP 07-40386
In 2002, the Interim Commission on Phytosanitary Measures (ICPM) adopted the International Standard for Phytosanitary Measures (ISPM) No. 15 (Guidelines for regulating wood packaging material in international trade). Two treatments are recognized: Heat Treatment (HT), in which wood must be heated to a core temperature of 56°C for 30 minutes, and fumigation with methyl bromide. As the last treatme...
O Encinas, J. I Briceño
Influence of ring width and wood density on durability of oak heartwood
2008 - IRG/WP 08-10639
Oak (Quercus sp.) is considered as one of the most durable European wood species. The most important factor influencing oak durability was extractive content. In our work, we were interested in if oak-wood durability is affected by ring-width and related density. Therefore, oak heartwood specimens made of boards with different ring widths were exposed to five different fungal species Daedelea quer...
M Humar, P Oven, F Pohleven
Water Absorption of Various Building Materials and Mold Growth
2008 - IRG/WP 08-10657
Mold growth is a major problem for house owners, as it often occurs on the surface of building materials in damp houses. The principal method to control mold growth on building materials is to prevent water penetration into the materials. A study was recently conducted to determine water absorption rates of different wood species and panel materials used as building materials, when water intrusi...
Dian-Qing Yang
Natural durability of fast growth plantation Eucalyptus grandis Hill, ex Maiden
2008 - IRG/WP 08-10660
One of the fast growing species cultivated in Uruguay of mayor economical importance is Eucalyptus grandis. Physical and mechanical properties of juvenile and mature wood from different regions have been deeply studied. However, since no scientific data of natural durability of this specie has been reported, natural durability of E. grandis from two sites (Rivera and Rio Negro) was evaluated. Two ...
S Böthig, A Sánchez, J Doldán
Effect of amphiphilic antioxidant alkyl ammonium ascorbate on inhibition of fungal growth: Application to wood preservatives formulation
2008 - IRG/WP 08-30466
Amphiphilic surfactants were synthesized from ascorbic acid and different fatty amines and evaluated for formulation of wood preservation products. Characterization of physicochemical properties of the new compounds indicated classical behavior of cationic surfactants. Antioxidant properties, estimated using methyl linoleate oxidation inhibition method, were similar to that of ascorbic acid teste...
C Gérardin , T Koumbi Mounanga, P Gérardin
Laboratory Evaluation of Flurox, a Chitin Synthesis Inhibitor, as a Bait Toxicant Against Microcerotermes diversus (Silvestri ) (Isoptera: Termitidae)
2008 - IRG/WP 08-30477
Microcerotermes diversus (Silvestri) is the most economically destructive termite in structures in southwest, Iran . One sustainable control strategy that usually help in reducing the subterranean termite damage in buildings , which is safe to the user and the environment is the use of IGRs in a suitable bait matrix. In the laboratory assays described here, the delayed toxicity of Flurox (a Chitin...
B Habibpour
Categorization of 300 timber, bamboo and cane grown in Bangladesh based on their families, origins, growths, physical and mechanical properties
2009 - IRG/WP 09-10684
In this study the 300 timber, bamboo and cane plants grown in Bangladesh have been classified into various categories based on their taxonomic families, origin of species, rate of growth, color of wood, texture of wood, shrinkage of wood, equilibrium moisture content (EMC) of wood, flammability of wood, cutting and sawing properties of timber, finishing and polishing qualities of wood, machining p...
A K Lahiry
Postia placenta gene expression of oxidative and carbohydrate metabolism related genes during growth in furfurylated wood
2009 - IRG/WP 09-10701
A range of studies the last decade have shown that modified wood can provide excellent protection against a range of wood deteriorating organisms, including decay fungi. However, we still lack information about why the modified wood is protected from microbial attack. Several hypotheses have been put forward e.g. inhibition of action of specific enzymes, but they still need testing. An understandi...
G Alfredsen, C G Fossdal
A rapid microscale assay for determining growth of wood inhabiting fungi against Lactobacillus metabolites
2009 - IRG/WP 09-20412
Lactobacillus sp. are well known for their ability to produce secondary metabolites with potent inhibitory activity against a wide range of bacterial species and there is increasing evidence to support their antifungal activity. These metabolites are often screened in laboratories using microscale 96-well plate optical density assays. The objective of this study was to develop an optical density a...
D O’Callahan, T Singh, I McDonald
Modelling of onset of mould growth for wood exposed to varying climate conditions
2009 - IRG/WP 09-20414
A performance-based service life design format based on climatic exposure on one hand and “resistance” of wood against mould growth on the other hand, is presented in this paper. A limit state for onset of mould growth is defined as the occurrence of traces of mould observed by microscopy. A dose-response model is proposed by which onset of mould growth can be predicted for an arbitrary climat...
S Thelandersson, T Isaksson, A Ekstrand-Tobin, P Johansson
Assessment of mould growth on coated wood - methods and application
2009 - IRG/WP 09-20423
Discolouring fungi reduce the service life of coated wooden claddings in façades and increase the total cost of ownership due to shorter maintenance intervals. The project “Enhanced service life on coated wooden facades” has as its main objective to develop new methods for early prediction of durability and longer aesthetic service life of coated wooden cladding related to consumer needs and ...
L Ross Gobakken, C M Whist, O Høibø, P J Hovde, E Larnøy
Modelling hyphal growth of the bio-incising fungus Physisporinus vitreus
2010 - IRG/WP 10-10710
The white-rot fungus Physisporinus vitreus preferentially degrades the pit membranes of bordered pits in tracheids and subsequently enhances wood permeability. Thus, P. vitreus can be used to improve the uptake of wood preservatives and environmentally-benign wood modification substances. This process can be used to enhance the use and sustainability of native conifer wood species by the wood indu...
M Fuhr, C Stührk, F W M R Schwarze, M Schubert, H J Herrmann
Postia placenta gene expression during growth in furfurylated wood
2010 - IRG/WP 10-10734
Modified wood can provide protection against a range of wood deteriorating organisms. But we still lack information about why the modified wood is protected from microbial attack. Several hypotheses have been put forward for the mode of action against wood decaying fungi, including inhibition of action of specific enzymes, but they still need further testing. In this study gene expression of the b...
G Alfredsen, C G Fossdal
Analyzing hyphal growth of the bio incising fungus Physisporinus vitreus with light-, confocal laser scanning- and, Synchrotron X-ray tomographic microscopy
2010 - IRG/WP 10-20438
Norway spruce wood is an important building material for the forest and wood industry. To improve wood permeability and uptake of wood modification substances Physisporinus vitreus is employed as a bioincising agent. In this study wood specimens were incubated with P. vitreus to assess hyphal colonisation and structural alterations of Norway spruce wood. After different incubation periods, semi-th...
C Stührk, M Fuhr, M Schubert, F W M R Schwarze
Onset of mould growth – the effect of climate variability and different geographic locations
2010 - IRG/WP 10-20446
This paper presents a study on how climate conditions at numerous locations in Sweden affect the risk of onset of mould on wood sheltered outdoors. The results indicate that the risk is clearly higher in the south compared to the north of Sweden. These differences are mainly explained by colder and dryer winter periods in the north which is unfavorable for development of mould. The results also sh...
M Häglund, T Isaksson, S Thelandersson
Drying Rates and Mold Growth on Various Building Materials under Different Environmental Conditions
2010 - IRG/WP 10-20454
Mold growth on building materials is a major problem for homeowners. The most suitable method to control mold growth on building materials is to utilize design features, construction tools and practices that prevent moisture accumulation, and keep the wood as dry as possible. In order to achieve this, engineers and homebuilders have to know the effects of various temperature and moisture conditi...
Dian-Qing Yang
Mould growth on wood-based materials – a comparative study
2010 - IRG/WP 10-20455
Ten different wood-based materials - preservative-treated wood, fire retardant-treated wood, modified wood, WPCs and untreated references of pine sapwood and spruce - were tested for mould growth according to SP method 2899 during 42 days at 90% RH and 22°C.
Even though the results must be interpreted carefully, they indicate significant differences in mould resistance between the materials tes...
P Johansson, J Jermer