Your search resulted in 6688 documents. Displaying 25 entries per page.
Annual report 1995
1996 - IRG/WP 96-60063
IRG Secretariat
Agenda WG III
1974 - IRG/WP 327
IRG Secretariat
Regulations of pesticides (including wood preservatives) in the United States
1977 - IRG/WP 397
G B Fahlstrom
Performance results of wood treated with CCA-PEG
1986 - IRG/WP 3363
The addition of polyethylene glycol (PEG) to the CCA system has been shown to reduce the surface hardness of poles and ease spur penetration during climbing. This paper addresses the results of tests dealing with preservative retention and penetration, permanence of CCA and PEG, strength, drying rate, and checking characteristics....
W P Trumble, E E Messina
Effects of the anaerobic wood decay bacterium Clostridium xylanolyticum on unbleached Pinus and Eucalyptus pulp
1991 - IRG/WP 1506
Clostridium xylanolyticum has been shown to produce extracellular enzymes capable of degrading wood. The present work was conducted to quantify growth on various lignocellulosic substrates and degradation of pulped wood fibre. In the latter tests Clostridium xylanolyticum was incubated at 35°C under anaerobic conditions in a medium containing 0.2% (w/v) peptone and 4% (w/v) unbleached Pinus and E...
G D Shelver, U Matai, W Van Wyk, A A W Baecker
Supercooling points of Anobium punctatum, the common furniture beetle
1995 - IRG/WP 95-10120
Ice formation within the body of larvae of the common furniture beetle Anobium punctatum causes death of the larvae. Freezing can therefore be used as a means of eradication of the larvae in infested wood. To optimize the freezing process, knowledge of the temperatures sufficient to kill the larvae is essential. Ice formation is initiated by temperatures equaling the so-called supercooling point, ...
T E Hallas, K Bohn Hansen
The Role of Coformulants in Preventing Bacterial Biotransformation of IPBC
2002 - IRG/WP 02-10436
The inhibitory effects of disodium tetraborate decahydrate and benzalkonium chloride (BAC), two common coformulants of IPBC in antisapstain treatments, on an IPBC-transforming enterobacterial isolate ‘W1’ were determined by their effect on the specific growth rate constant in vitro. The IC50s of IPBC, BAC and borate were found to be 0.46, 0.026 and 5.7 mM respectively. The IC50 of the Arch ant...
S R Cook, D J Dickinson
Decay resistance of resin treated wood
1999 - IRG/WP 99-30206
Selected natural resin systems were evaluated for their potential as wood protecting agents according to standard test procedures. As indicated by the European standard EN 599 both a Basidiomycete test according to EN 113 and a ENV 807 soil bed test were carried out. Six resin treatments were tested using 3 concentration or treatment levels. Using the biocidal activity criteria as usually applied ...
J Van Acker, A J Nurmi, S M Gray, H Militz, C Hill, H Kokko, A O Rapp
Monographic card for Stereum hirsutum
1973 - IRG/WP 119 E
C Jacquiot
IRG 33 invitation
2002 -
IRG Secretariat
Minutes of the meetings of WG II
1980 - IRG/WP 2141
IRG Secretariat
IRG Documents 1991
1991 - IRG/WP 5378
IRG Secretariat
IRG 21 invitation
1990 -
IRG Secretariat
Agenda Plenary 1985
1985 - IRG/WP 5220
IRG Secretariat
Agenda WG IV
1972 - IRG/WP 400
IRG Secretariat
A direct basidiomycetes test methodology. Report on an EWPM ring test
1988 - IRG/WP 2306
Results of an EWPM-ring test using a direct basidiomycetes test methodology are reported. The test is caracterized by using big test blocks and infestation by infected wood under unsterile conditions. The test procedure needs further development work, but the results are so promising that co-operation with CEN and EHC is initiated with the purpose of recognition and standardization....
B Jensen
Detection of semi-quantitative and qualitative enzymatic activities of blue-stain fungi
2000 - IRG/WP 00-10347
Blue-stain, produced in forests, continues to be a problem in countries of moderate climate. In forestry, in certain geographical areas of Spain, it has been observed that anti-sapstain products have not always been efficient, as their fungicidal effectiveness varies on occasion, depending on the species of wood and microbiota that exist in the region. It is not always easy to identify the species...
M T De Troya, F Llinares, D Muñoz-Mingarro, M J Pozuelo, N Acero, C Rodríguez-Borrajo, A M Navarrete
Antifungal activity of a stilbene glucoside from the bark of Picea glehnii
2001 - IRG/WP 01-10402
Stilbene glucosides are widely distributed as phenolic extractives in the bark of Picea glehnii, a commercially species planted in the northern area of Japan, and its content reaches to more than 10% by the dried weight of the bark. Although antifungal activities of these compounds have been reported, the mechanism of growth inhibition is still unclear. Isorhapontin (5,4'-dihydroxy-3&...
S Shibutani, M Samejima
Treatment of Douglas fir heartwood with disodium octaborate tetrahydrate (Tim-BorÒ ) to prevent attack by the Formosan subterranean termite
1991 - IRG/WP 1487
Toxicity of disodium octaborate tetrahydrate (Tim-BorÒ) to Coptotermes formosanus Shiraki (Isoptera: Rhinotermitidae), and termite feeding on treated Douglas-fir heartwood were evaluated in laboratory and field tests. Feeding on filter papers impregnated with Tim-BorÒ solutions reduced but did not eliminate termite gut protozoan populations. In a forced-feeding laboratory assay, Douglas-fir hear...
M Tamashiro, R T Yamamoto, J K Grace
Abstracts of some papers promised for IRG 27
1996 - IRG/WP 96-60062
IRG Secretariat
Agenda Sub-Group I:5
1978 - IRG/WP 188
IRG Secretariat
Natural Resistance of timbers to marine borer attack. COIPM/IRG CO-OPERATION. Final report concerning panels exposed in the sea at Sekondi, Ghana
1979 - IRG/WP 449
The test was carried out according to Document COIPM/72.044, Revised procedure for the testing of naturally durable timbers against marine borers. The panels of the three species remaining in the test at the end of 1978 were removed and assessed visually. An average rating was given to the panels of each species....
F F K Ampong
1983 Official Photo
1983 -
IRG Secretariat
Treatment of particleboard with isocyanate resin to impart improved dimensional stability and water repellency
2000 - IRG/WP 00-40178
Standard particleboard panels (for interior use) of 16 mm nominal thickness were cut into samples measuring 6.4 mm x 78 mm2. The samples were divided into 4 end matched batches. Two batches were treated with isocyanate resin and cured. The other 2 batches were left untreated. One of the treated batched and 1 of the untreated batches were edge sealed with epoxy resin prior to isocyanate resin appli...
K M Filcock, P Vinden
On the use of % weight loss as a measure for expressing results of laboratory decay experiments
1992 - IRG/WP 92-2394
It is suggested that careful consideration should be given for the presentation of data from laboratory decay experiments, especially when comparisons are being made from experiments involving wood blocks of varying densities. Percent weight loss can be used for comparisons of durability even if wood blocks vary in density. It is suggested that the absolute weight loss for a given volume (g/cm³) ...
T Nilsson, G F Daniel