Your search resulted in 207 documents. Displaying 25 entries per page.
Colour changes in unpainted wooden façades – Fifty Shades of Grey
2018 - IRG/WP 18-10903
In Norway the use of weathered unpainted, wooden façades has increased in popularity the last 20 years, both in single family houses as well as in multi-story and non-residential buildings. The benefit of using unpainted wood as façade material can be several: low maintenance costs, low environmental impact and low carbon footprint as well as contemporary and trendy aesthetic appearance.
The va...
K Zimmer, L R Gobakken, O Flindall, M Nygaard
Testing the durability of timber products above ground using the block-test method – A critical review
2018 - IRG/WP 18-20637
The block-test method for testing the durability of wood and wood products above ground is reviewed critically with respect to practical aspects, moisture loads, corresponding decay development, and the possibilities of assessing test specimens by determining the dynamic modulus of elasticity (MOEdyn) of wood. In total, 36 blocks representing different modifications of the original set-up and a wi...
C Brischke, A Gellerich, H Militz
Certification system for treated wood and wood preservative in the relation to regulations in Japan
2018 - RG/WP 18-20639
Certification system about wood protection products in Japan is described to understand the interaction between regulations and certifying organizations. Major regulations are Building Standard Law, Chemical Substances Control Law, Poisonous Deleterious Substances Control Act, Japanese Industrial Standards, and Japanese Agricultural Standard (JAS). Treated wood products are certified with JAS mark...
K Yamamoto, I Momohara
Glueline fungicides in veneer based engineered wood products – updated results from laboratory work for the H1.2 hazard class in New Zealand
2018 - IRG/WP 18-30726
Results from New Zealand H1.2 ‘bin’ trials containing plywood glueline treated with triadimefon and cyproconazole were reported in 2012 (IRG/WP 12-30593). One of these trials has continued to the present day (2108) and updated results of this trial are reported. The triadimefon and cyproconazole glueline treatment continues to compare with, or outperform, the reference preservative used, bei...
A Siraa, K Day, B Kibby
Properties and potential use of Irvingia gabonensis and Irvingia wombolu kernel extracts as natural wood adhesives: Towards formaldehyde free wood composite products
2018 - IRG/WP 18-40832
Irvingia species are widely distributed in central and West Africa as well as parts of Asia and are earmarked for domestication due to the multitude of potential products that can be obtained from them. With renewed interest in renewable sources, the current study establishes the feasibility of utilizing extracts from Irvingia gabonensis and Irvingia wombolu kernels as wood adhesives. Proximate an...
A O Alawode, S O Amiandamhen, M Meincken, L Tyhoda
Declaring life cycle inventory of toxicity related emissions in environmental product declarations of preservative treated wood products
2018 - IRG/WP 18-50339
Life cycle assessment (LCA) including impacts on toxicity for preservative treated wood has been shown to have large uncertainties. With the growing demand for verified LCA in environmental product declarations (EPD), the need for reliable data is crucial for realistic assessment of wood products. Uncertainty is caused by several issues such as service life prediction, leaching rates and calculati...
L G F Tellnes, C Askham, P-O Flæte, M Klamer
The Commercial Forestry and Forest Products Industry in South Africa – A brief overview
2018 - IRG/WP 18-50342
The presentation made by Mr Michael Peter, Executive Director of Forestry South Africa, provides insight into the commercial forestry and forest products industries in South Africa. The forestry industry in South Africa is based solely on the propagation of exotic trees, grown in plantations in the higher rainfall regions of South Africa.
The presentation shows the ownership, geographical extent...
M Peter
Alternative fumigants to Methyl Bromide for wood products: Review of the development and preliminary tests of Ethane Dinitrile (EDN) in Canada
2019 - IRG/WP 19-30743
This paper reviews recent developments and updates in the search for alternative fumigants to ozone-depleting methyl bromide, for wood products fumigation. The absence of alternative treatments may result in significant market disruption if further restrictions on methyl bromide are imposed. This paper reviews key challenges and key attributes of an ideal fumigant and also the status of standardis...
A Uzunovic
Terrestrial laser scanning (TLS) – a potential tool for improved utilisation of the natural durability of Scots pine for solid wood products
2019 - IRG/WP 19-50358
The natural durability of sapwood of most species is generally low, while heartwood can be more resistant to biodeterioration. For the sawmill industry various lumber products require certain diameters and lengths of the logs in addition to requirements for wood properties. When utilising the heartwood, it is therefore important to acquire information already in the forest about which trees that c...
P-O Flaete
Towards better integration of wood protection in the forestry wood industry chain - a case study on hybrid poplar
2019 - IRG/WP 19-50359
Wood and wood products are limited in service life as in the forest ecosystem trees at end of their life are degraded to re-enter the bio-geochemical cycle. Humans can select wood species with a level of natural durability fit for an envisaged end use. Mainly those applications that require a long service life under conditions that are similar to those at soil level in a forest ecosystem have been...
J Van Acker
Extraction, identification and antifungal activity of polar extractives originated from various wood species
2020 - IRG/WP 20-20673
Extractives are non-cell wall small molecules present in wood and other lignocellulosic materials that can be removed by solvents. Although they represent a minor fraction in comparison with the structural cell wall components, they are an important source of functional groups or molecules with bioactivity or antioxidant properties, that could be used in medicine, cosmetic or wood preservation. T...
R Herrera, F Poohphajai, J Labidi, S Willför, A Sandak
Development of procedures for sampling, testing, and classification to determine the biological durability of wood and wood products
2020 - IRG/WP 20-20676
This paper informs about a research project, which deals with several shortcomings and a lack of clarity within EN 350:2016. The project started in January 2020, will run for 3 years, and is operated by the Institute of Wood Technology Dresden (IHD) and the University of Goettingen (UGOE).
Determination and classification of durability of wood and wood products against wood-destroying organisms ...
W Scheiding, K Jacobs, S Bollmus, C Brischke
Is cascading of harvested wood products really an environmentally beneficial strategy in Finland and Norway?
2020 - IRG/WP 20-50364
The role of cascading wood waste in the bioeconomy is highlighted in the several strategic documents. The European Waste Framework Directive describes a waste hierarchy where re-use and recovery are considered more favourable options compared with energy recovery, and applies strict re-use and recycling targets to household waste and non-hazardous construction and demolition waste. It is not fully...
C A S Hill, G Alfredsen, M Hughes, L R Gobakken
Plasma treatment of wood - a review of 15 years of research in Göttingen
2021 - IRG/WP 21-40913
Wood is an important renewable resource and can be found omnipresent in everyday life. Its natural properties offer numerous advantages regarding physical, mechanical but also aesthetic aspects, but also challenges that one has to address with various modification methods.
Driven by the desire to promote the use of promising new technologies using plasmas, there has been a close research network ...
P Sauerbier, R Köhler, G Avramidis, W Viöl, H Militz
Aiming for eco-friendly log production and wooden construction!
2021 - IRG/WP 21-50365
In order to reduce greenhouse gas (GHG) emissions to zero by 2050 in the fields of forest and forest products, it is necessary to promote appropriate management and renewal of planted forests, and development of wooden building materials and the wooden construction of mid-to-high-rise buildings with lower GHG emissions. Unless we also try to reduce the environmental loads other than GHG for such d...
N Hattori
Biological assessment of bio-based phase change materials in wood for construction applications
2022 - IRG/WP 22-40935
Solid wood can serve multi-functionality for energy savings in buildings. The study reveals the results of bio-deterioration and degradation of solid Scots pine wood used to incorporate single or multicomponent fatty acid mixtures as bio-based phase change materials (BPCMs). The sapwood samples were impregnated with capric acid (CA), methyl palmitate (MP), lauryl alcohol (LA) and a mixture of coco...
S Palanti, A Temiz, G Köse Demirel, G Hekimoğlu, A Sari, M Nazari, J Gao, M Jebrane, T Schnabel, N Terziev
Sustainable wood products development in a bio-refinery perspective: case studies in French Guiana
2022 - IRG/WP 22-50370
French Guiana, by its belonging to the Amazon region and the Guiana shield, has very specific environmental and social characteristics in the French regional ensemble. In this context, it is thus necessary to find how to reconcile the economic development of the territory, the conservation of biodiversity and the recognition of local knowledge and practices. Bringing together multidisciplinary ski...
E Houël, N Amusant, J Passelande, J Bossu, R Lehnebach, E Wozniak
Evaluation of different wood by-products for sustainable building biomaterial production using fungal mycelium
2022 - IRG/WP 22-50373
As human population increases, the demand for new innovative, sustainable, and low impact construction materials also grows. Mycelium-based composites have shown to be an excellent alternative for traditional products ranging from low-density objects to semi-structural applications. They also present the advantage of using the waste streams from other productive processes as feedstock, enabling th...
C Charpentier-Alfaro, M Poggerini, S Palanti, G Della Rocca, D Pellegrini, A Crisci
Japanese traditional wooden building construction project in Bangkok - Part 2 Verification of termite control method
2023 - IRG/WP 23-11022
We have confirmed the effectiveness in Thailand of chemicals and stainless steel mesh that have been proven effective in Japan.
Stake and container tests were conducted and the following results were obtained:
1. There is no damage on specimens covered with stainless steel mesh, CuAz-treated specimens both stake test and container test.
2. Natural pyrethrin-treated specimens without stainless ...
H Ishiyama, S Murakami
Laboratory durability testing of preservative treated wood products – first attempts and observations
2023 - IRG/WP 23-20697
In the past, durability classes (DC) had been assigned to wood species, sometimes also to homogenously modified wood-based materials such as thermally modified wood. More recently, some standards allow for classifying the biological durability of chemically modified wood, preservative treated wood and wood composites. Even treated products may be subject to durability classification, but necessary...
C Brischke, M Sievert, M Schilling, S Bollmus
Japanese traditional wooden building construction project in Bangkok - Part 1 Project outline, building implementation and effects
2023 - IRG/WP 23-40992
The purpose of this project is to build new ways to utilize wooden resources in Japan. Japan's forestry industry is in decline despite its abundant forest resources due to a lack of successors and other reasons. Meanwhile, in Southeast Asian countries, reinforced concrete houses, which are not suited to the climate, are on the rise due to a lack of wood and technology. To solve these problems in b...
S Murakami, K Kawaguchi, H Ishiyama
What products are architects using? Relationships between deterioration part and structural performance in wooden houses
2023 - IRG/WP 23-50374
Architects work in the development of ideas around buildings and all the nuclei where human activity is generated. It is a work of organization of matter, in time and space, where the conceptual world of ideas and the aspirations of inventions, the interior world interact with the exterior in many kinds of realities.
But as architects, we have always been interested in why and how things have bee...
I de las Casas
Environmental Benefits of Wood Preservation
2023 - IRG/WP 23-50377
Over the past decade or two, many people have become significantly more aware and concerned about the global environment and the health of our planet. Building with wood products from sustainably managed forests carries significant environmental benefits. The ability of a growing tree to absorb carbon dioxide (CO2) and sequester the carbon is beneficial in the role of combating rising CO2 levels...
A Siraa
Manipulation of the hierarchical wood structure for extended carbon storage in the built environment
2023 - IRG/WP 23-50381
The sustainable processing of trees into construction materials can act as carbon storage. Carbon storage in durable sustainable wooden construction material has cumulative effects and net gain in storage in the built environment that can be offset by net losses in forest carbon by cutting the tree. Carbon storage for an extended period plays an important role in the mitigation of CO2 emissions an...
T Singh, A Arpanaei, D Elustondo, Q Fu
Enhanced durability of bio-based materials for green building
2023 - IRG/WP 23-50382
Wood protection technologies provide tools to enhance the durability of bio-based materials for green building. Both wood and related bio-based material are regarded as eminent for green building. It allows to underpin several of the United Nations sustainable development goals and is regarded critical for the Green Deal objectives of the EU. Nevertheless, to enhance the potential it needs to be b...
J Van Acker, L De Ligne, J Vand den Bulcke