Your search resulted in 3023 documents. Displaying 25 entries per page.
Assessment of hydrophobic properties of acetylated and furfurylated Korean wood species
2024 - IRG/WP 24-30812
To increase the utilization of Korean wood species, the hydrophobic properties of the most commonly used wood species in Korea were compared according to wood modification. Pinus densiflora (sapwood and heartwood) and Larix kaempferi (heartwood) were selected as test wood species, and Pinus radiata (sapwood) was selected as the control wood species. The wood modification was performed by acetylati...
S-M Yoon, Y-S Choi, H-M Lee, Y Park, W-J Hwang, S-K Jang
International joint field trial on the moisture performance of wood – Set up and first results
2024 - IRG/WP 24-40996
Wood durability to decay stems from its inherent resistance to fungi resistance to fungi. In this regard, wood's ability to withstand moisture uptake plays an important role as the lower threshold for wood decay is a moisture content of 25%. However, the aspect of moisture resistance is not yet sufficiently emphasized as a durability factor, both in the assessment of durability as a material prope...
C Brischke, et al. (33 co-authors)
Evaluation of the water exclusion ability and inherent bioactivity of heartwood against decay in Japanese and European wood species via above-ground exposure and water absorption tests
2024 - IRG/WP 24-40998
The natural durability of wood has been thought to mainly depend on bioactive extractives and the water exclusion ability. To clarify the contribution of each factor to wood durability, above-ground exposure tests were conducted on Japanese and European wood species. A double-layer test was carried out using heartwood specimens of four wood species, i.e., Japanese cedar, Japanese cypress, Scots pi...
T Osawa, R Noda, K Yamamoto
Outdoor termite resistance performance of zinc borate (Borogard® ZB) treated parallel strand lumber (PSL) – 15 years field test results
2024 - IRG/WP 24-40999
This report discloses the outdoor termite resistance performance of PSL samples treated with zinc borate at a dosage of 0.85% BAE and 1.72% BAE in Wuxi, China. The outdoor field trial lasted for 15 years and observations were made after 6 months, 3 years, 5 years 1 month, 6 years 6 months and 15 years. The retaining rates of B2O3 and ZnO in the final samples were also tested, and the hypothesis wa...
S Shi, E Laval, K Lung, F Ascherl, R Williams, W Li, X Li
Field performance of preserved shakes and shingles
2024 - IRG/WP 24-41000
Wood shakes and shingles are used in applications where they are at risk of decay, either in sidewall (UC3.1) or roofing (UC3.2) applications. Material durability may come from using the heartwood of naturally durable species, using preservative treatments, or both. Through a series of long-term field tests, this paper explores the performance of naturally durable and preserved shakes and shingles...
R Stirling, S Kus
How personality traits influence the perception of fungal decay in a wooden cladding – A survey in three Modelling wood moisture content in outdoor conditions from measured data
2024 - IRG/WP 24-41002
This study examined perceptions of fungal decay damage on wooden cladding across Norway, Sweden, and Germany. The majority of respondents across all countries did not find the fungal decay damage in question acceptable, with the least acceptance in Norway. This could be due to Norway having the highest frequency of wooden residential buildings and the most experience with maintaining wooden claddi...
G W Gustavsen, G Alfredsen, P B van Niekerk, J Niklewski, C Brischke
Modelling the service life of wood in ground contact – Verification of remotely sensed soil data from the reanalysis dataset ERA5-Land using in-situ measurements at a test site of utility poles in Eastern Norway
2024 - IRG/WP 24-41003
This study compared soil moisture and temperature estimates from the 5th European reanalysis (ERA5-Land) dataset with in-situ measurements to assess the accuracy and applicability of ERA5-Land data for modelling the service life of wood in ground contact. The ERA5-Land soil temperature estimates showed a moderate correlation with the in-situ temperature measurements (Spearman’s ρ of 0.73) and a...
U Hundhausen, P B van Niekerk, B Marais
Modelling wood moisture content in outdoor conditions from measured data
2024 - IRG/WP 24-41005
Sustainable use of wood requires an understanding of expected service life, particularly when the material is exposed to outdoor conditions and, thus, fungal decay. Since moisture is the primary vector for fungal decay, accurate moisture prediction is a key component in service life assessment. For this purpose, the present study leverages existing measured data for linear regression of in-field m...
J Niklewski, P B van Niekerk, L Meyer-Veltrup, J Sandak, C Brischke
Service life of poplar, a low durability hardwood
2024 - IRG/WP 24-41007
Hybrid poplar is the most common plantation hardwood of the temperate climate zone and is complementary to natural stands of aspen with mainly plantations in Europe and China. Poplar wood has been considered as a valid alternative for many of the construction applications of softwoods especially when considering engineered wood products.
The natural durability of hybrid poplar is low and for a ra...
J Van Acker, X Jiang, L De Ligne, J van den Bulcke
Changes in decay risk of wood in ground contact over Europe, from analysis of historic climate conditions
2024 - IRG/WP 24-41008
Changing climate conditions will affect global temperature and precipitation patterns, shifting some geographical areas into states that are more suitable for fungal wood decay. Climate normals, which are taken over a 30-year period, capture vast spatial and temporal variations in these conditions and comparing these can show changes over time. Importantly, being able to identify locations that ha...
P B van Niekerk, B N Marais, G Alfredsen, C Brischke
Leaching and chemical redistribution of CCA components in refractory heartwood of E. nitens
2024 - IRG/WP 24-41011
Chromated Copper Arsenate (CCA) is a wood preservative widely used to protect against fungal and insect attack. The fixation mechanism of CCA involves complex chemical reactions, including the reduction of chromium (VI) to chromium (III) and the formation of insoluble complexes. Despite fixation efforts, a portion of CCA components tends to leach from treated wood, influenced by factors like wood ...
J R Vargas, L Yermán, K C Wood, T Singh
Field facility for conducting wood durability tests at LSU Agricultural Center
2024 - IRG/WP 24-41012
Efforts by Louisiana State University Agricultural Center (LSU AgCenter) to conduct wood durability research on C. formosanus and other wood-related topics, have led to establishing three field research sites to test wood products against Formosan subterranean termites (New Orleans, La), and native subterranean termites (Franklinton, LA), and to test utility poles for outdoor exposure, decay resis...
Q Wu, J Curole
Field test method for wood in above ground situation - The full CEN/TC 38 guideline for the Sandwich method. Part 1 - Determining the relative protective effectiveness of a wood preservative
2024 - IRG/WP 24-41013
The attached draft CEN Technical Specification (i.e. pre-EN standard) has been drafted in order to become an alternative to the Lap-Joint test method (EN 12037:23) for testing of wood in above ground situation and the draft CEN/TS Part 1 is specifically intended for determining the relative protective effectiveness of a wood preservative. The new draft CEN/TS is based on a test method developed by...
M Westin, R Ringman, A Christof, F Friese
Analysis and performance of spruce alternative species and discarded wood for windows production
2024 - IRG/WP 24-50386
Climate change is having a significant impact on European forestry, particularly on the softwood species used for window frames. This study investigates potential replacement tree species for spruce (Picea abies), the predominant material for window frames. We evaluate Douglas fir (Pseudotsuga menziesii), Scots pine (Pinus sylvestris), thermally modified poplar (Populus nigra) and discarded silver...
B Lesar, J Levanič, M Humar, A Treu
Keeping wood greenest: Maximizing the unique benefits of preserved wood through end-of-life planning to realize carbon sequestration and a circular economy
2024 - IRG/WP 24-50387
While competitive fuels and different energy sources are a main driver of current difficulties with using end-of-life wood products for fuel, that is a potentially smaller problem than the rapidly changing carbon footprints of competitive materials, which can potentially be smaller than wood, if the wrong decisions are made at the end of life by users and waste generators. While users have several...
J D Lloyd, B Poe
Bio-based thermal insulation panels – a way of cascading utilization of post-consumer wood
2024 - IRG/WP 24-50388
Cascading wood utilization is critical to fulfilling a circular economy frame in the wood industry. The work's aim was to apply wood dust from plywood production to the production of innovative bio-based thermal insulation panels. Trametes hirsute fungus was used as a composite binder, and then a composite structure and thermal insulation properties, water absorbability, and strength properties of...
W Perdoch, A Szelag
Levels of chromated copper arsenate in aged radiata pine vineyard posts
2024 - IRG/WP 24-50389
At the Centre for Timber Durability and Design Life, Australia a cooperative project is underway with Forest and Wood Products Australia, supported by a consortium of timber producers, chemical suppliers and timber users to identify alternative pathways for treated timber and EWP’s. Under this initiative, we are focusing on establishing the current and forecasting future volumes of treated timbe...
T Singh, T Yi, P Mitchell, J Norton
Exploring the migration of creosote in freshwater environments: A study on treated wood immersion
2024 - IRG/WP 24-50392
Creosote is used as a wood preservative in aquatic environments and contain polycyclic aromatic hydrocarbons as active ingredients. It is critical to quantify the impact of these commodities on the environment to ensure specific uses of these commodities complies with federal and state regulatory standards for water bodies. This study explores Polycyclic Aromatic Hydrocarbons (PAH) migration patte...
I Rashidijouybari, M Konkler, K Quigley, G Presley
Quantitative assessment of wood preservative emissions to waterways
2024 - IRG/WP 24-50393
The Organisation for Economic Co-operation and Development (OECD) Emission Scenario Document (ESD) for Wood Preservatives provides methods to quantify the release of active substances from treated wood for various scenarios including sheet pilings in a flowing waterway (OECD 2013). The ESD is used for environmental risk assessment of wood preservatives according to the Biocidal Products Regulation...
K J Rader, R Carbonaro, C Mackie
Phytosanitary treatment of roundwood for oversea shipping - on the suitability of dry heat treatment as alternative to climate-change effective fumigation
2024 - IRG/WP 24-50394
The transcontinental trade of roundwood requires thorough phytosanitary treatment to protect native flora and fauna against foreign pests. This is generally done by fumigating shipping containers packed with roundwood with sulfuryl fluoride, a potent greenhouse gas. After treatment, the gas is released into the atmosphere, causing massive emissions. Since 2017, the usage of sulfuryl fluoride in th...
G Weber, L Schrader, J Trautner
Overview of Canadian CRD wood waste recycling ecosystem
2024 - IRG/WP 24-50395
One of the main constituents of solid waste in Canada is waste from the construction, renovation and demolition (CRD) sector. Therefore, there are strong social, economic and ecological needs to reduce the generation of CRD waste and to increase the volume diverted from landfills and incineration. However, as the CRD waste management is not a simple ecosystem, it does require a comprehensive appro...
G Boivin, D Schorr
Determining the minimum water vapor permeability of exterior wood coatings by means of hygrothermal and decay models
2024 - IRG/WP 24-20717
The objective of this study was to determine the minimum water vapor permeability of exterior wood coatings for log homes using hygrothermal and decay modeling. The approach is based on a worst-case scenario assumption, namely a moisture trap at a given wood moisture content in a coated wall log. The minimum limit of vapor permeability of the coating system was determined by simulating the time re...
U Hundhausen, S Ullah, D Kraniotis
The durability and mechanical properties of 40 years old Black locust poles
2024 - IRG/WP 24-11042
This study investigates the durability and mechanical properties of 40-year-old black locust (Robinia pseudoacacia) poles harvested from a vineyard in Slovenia. Wood from these poles was compared to recently harvested black locust wood to determine possible reuse options. Visual inspection, hyperspectral imaging, and laboratory tests were conducted to assess decay, density, mechanical properties, ...
M Humar, J Malik, J Levanic, D Krzisnik, E Kerzic, B Lesar