Your search resulted in 120 documents. Displaying 25 entries per page.
Alternative products enhancing dimensional stability comparing to conventional treated products in Japan
2019 - IRG/WP 19-40885
The Act on the Promotion of the Utilization of Wood in Public Buildings (2010) in Japan has made a new stream of the utilization field of timber from housing constructions to larger scale non-housing constructions. After the act, the performance of dimensional stability in preservative treated products becomes more important factor than before. Therefore, various technologies have been developed, ...
K Yamamoto, D Tezuka, Y Sugai, S Maeda, I Momohara
Penetration pathway of oilborne preservative in heartwood of Japanese larch (Larix kaempferi)
2019 - IRG/WP 19-40886
The liquid permeability of Japanese larch (Larix kaempferi) wood is extremely low, especially in the heartwood. It is difficult to achieve the penetration of wood preservatives, which is specified by standards, with pressure treatment of waterborne preservatives. Recently, the protection treatment with an oilborne preservative called “deeper penetration treatment” is commercially available, wh...
H Shibui, T Miyauchi, T Shigeyama, M Ikeda, Y Sugai
Influence of Drying Condition of Wood on Rusting of Nail
2019 - IRG/WP 19-40887
Recently in Japan, the durability of metal joint in wooden structures become important. Revised Building Standard Law was enacted in 2000 and Act on the Promotion of Popularization of Long-life Quality Housing was enacted in 2008 in Japan. Since then, the durability of the metal joints in the wooden houses becomes important. But there are not any detailed regulation for the durability of the metal...
H Ishiyama, N Wada, T Nishimura, T Mori
Incidence of treated wood in a wood recycling facility in Western Oregon, USA: an update
2019 - IRG/WP 19-50346
Preservative treated wood provides excellent long-term performance under a variety of adverse conditions, but it must eventually be replaced. The US Environmental Protection Agency recommends reuse in a similar application, but if that is not an option, disposal in a municipal solid waste facility equipped with a leachate management system. Concerns about diminishing landfill capacity have led m...
J J Morrell
Wood veneer with high flexible decorated with nanoparticles for highly efficient water treatment
2019 - IRG/WP 19-50347
Natural wood is mainly comprised of numerous long, partially aligned channels (lumens) as well as nanochannels. Wood with these quick and effective passages is suitable for a membrane/separation material. However, a suitable thickness range of wood along its growth direction is essential to effectively separate small molecular, and the wood membrane is too thick to clean easily. In this paper, woo...
S Chang, D Xu, G Liu, J Hu, X Li, Y Liu
Outbreak of timber pest in Philippines: A consequence of frequent typhoons
2019 - IRG/WP 19-50348
Evidence of climate change and its impact are now visible in many parts of the world. This report presents impact of natural disasters in particular typhoons on trees as it passes across the Philippines archipelago every year. Typhoons damage and destroy large number of trees which soon rot under moist and warm conditions. Wood beetles and termites find these sources very quickly, breaking down th...
P Dhang
Study on Nailed Joint with Iron Contamination. Part1: Shear Performance of Nailed Joint with Iron Contamination
2019 - IRG/WP 19-50349
In Japan, The building standard law was amended in 2000.1) The use of metal joint was obligated by this law. Since then, metal joints have been largely used for wooden buildings. Also, Act on the Promotion of Popularization of Long-life Quality Housing was enacted in 2009 and leaving Long-life Quality Housing has been focused on2). However, leaving houses to posterity for a long time causes severa...
R Nakano, D Nakano, H Ishiyama
Study on Nailed Joint with Iron Contamination. Part2: Elucidation of the Occurrence Condition of Iron Contamination
2019 - IRG/WP 19-50350
In recent years, efforts towards wooden buildings are progressing in Japan. And many woods are used in various places. However, various problems have also occurred in wooden buildings. One of the problems is iron contamination which appears when wood and metal chemically react. At present, tree species that are prone to iron contamination and components that cause iron contamination are clarified....
D Nakano, R Nakano, H Ishiyama
Wood protection techniques and natural weathering: their effect on aesthetics and preference of people
2019 - IRG/WP 19-50351
Current research successfully contributes to improving wood protection techniques. However, the vast majority of research on preventing degradation of wood ignores a critical aspect of making successful products and processes – user selection of materials, which may largely depend on the aesthetical qualities. Wood treatments change the tactile and visual properties of wood substantially and the...
D Lipovac, M D Burnard, A Sandak, J Sandak
2018 Railway Tie Survey and the Non-Hazardous Secondary Materials Rulemaking Activities
2019 - IRG/WP 19-50352
This presentation will discuss a survey AAR recently completed on the management of used crossties in the North American rail industry. Approximately 23 million new wood ties are purchased and installed in the North American rail network every year. The presentation will show the number and percentage of ties which are managed by reused in track, reuse in commercial, agricultural or residential la...
R Fronczak, S Smith
Start with “wood”
2019 - IRG/WP 19-50353
The concentration of carbon dioxide in the atmosphere is increasing. The rate of build-up of carbon dioxide (CO2) in the atmosphere can be reduced by taking advantage of the fact that atmospheric CO2 can accumulate as carbon in vegetation and soils in terrestrial ecosystems. Using wood reduces the carbon footprint in two key ways – through carbon storage and avoided greenhouse gas emissions, bec...
D Krzisnik, M Humar
Knowledge exchange and transfer from academia to industry in the field of wood protection research – Activities of the IRG-WP Communications Committee
2019 - IRG/WP 19-50354
The International Research Group on Wood Protection (IRG) was founded in 1969 as a structured group of like-minded scientists and technologists focused on generating knowledge of the science of wood deterioration, and novel solutions to provide sustainably and environmentally responsible products for the protection of wood-based materials. The primary function of the IRG is to provide opportunitie...
F Latorre, B Abbott, C Brischke, M Humar, D Jones, E Larnoy, L Nunes, A Preston, T Singh
The InnovaWood Module Bank: Building an international e-learning platform for shared MSc courses in wood science and technology
2019 - IRG/WP 19-50355
The InnovaWood Module Bank is a shared e-Learning platform for standalone science, technology and education modules in wood science. A group of members of InnovaWood have committed to jointly develop this platform. The institutes benefit in that they can widen the range of courses they offer and use their teaching capacities more efficiently. Students obtain the possibility to take online courses ...
M Irle, U Kies, H Militz, P Sauerbier, M Vieux, A Prosic, B Wolfsberger, F Pichelin, I Mayer
Word wrangling: the art of editing scientific publications
2019 - IRG/WP 19-50356
The main method by which scientists communicate their findings to the world is through journal papers, but many scientists struggle with the task of self-editing, and some find writing itself to be a chore. Understanding the different stages of editing, and what takes place in each of those stages, can help to reduce the complexity of the editing task, assist an author to self-edit, and reduce cos...
J Taylor
Terrestrial laser scanning (TLS) – a potential tool for improved utilisation of the natural durability of Scots pine for solid wood products
2019 - IRG/WP 19-50358
The natural durability of sapwood of most species is generally low, while heartwood can be more resistant to biodeterioration. For the sawmill industry various lumber products require certain diameters and lengths of the logs in addition to requirements for wood properties. When utilising the heartwood, it is therefore important to acquire information already in the forest about which trees that c...
P-O Flaete
Towards better integration of wood protection in the forestry wood industry chain - a case study on hybrid poplar
2019 - IRG/WP 19-50359
Wood and wood products are limited in service life as in the forest ecosystem trees at end of their life are degraded to re-enter the bio-geochemical cycle. Humans can select wood species with a level of natural durability fit for an envisaged end use. Mainly those applications that require a long service life under conditions that are similar to those at soil level in a forest ecosystem have been...
J Van Acker
Wood Protection in Canada
2019 - IRG/WP 19-50360
Wood Preservation Canada is dedicated to promoting and supporting a stronger Canadian wood treating industry. In this presentation, wood protection in Canada will be reviewed through the lens of IRG’s five sections. Canada has 10% of the world’s forests, harvests 155 million cubic metres annually, and exports more than $17.5 billion CAD of wood products. Decay is the primary cause of wood biod...
M Tauvette, R Sterling
Durability and climate change - implications for wood building structures
2019 - IRG/WP 19-50361
Sustainable building practices are rooted in the need for reliable information on the long-term performance of building materials; specifically, the expected service-life of building materials, components, and assemblies. This need is ever more evident given the anticipated effects of climate change on the built environment and the many governmental initiatives world-wide focused on ensuring that ...
M Lacasse
GDR3544 “Science du Bois” - Academic and Industrial French Partnerships on Wood Science
2019 - IRG/WP 19-50362
The wood sciences are currently practiced by a very diverse community of disciplines, themes and institutional contexts of different actors. The Research Group in Wood Sciences (GDR3544 "Sciences du Bois") was created in 2012 by the National Center for Scientific Research (CNRS), and renewed from 2016 to 2020.
The objectives of GDR " Science du Bois " are to manage the coordination of wood scienc...
J Gril, R Marchal, K Candelier
Development of a Standard for Preservative Treated Wood to be used in the Arctic
2019 - IRG/WP 19-20677
There is ongoing interest in the Arctic with political, environmental and recreational developments almost daily. The impact of global warming on loss of permafrost and sea ice is widely reported. In the last three years several cruise ships have traversed the North West Passage. This increased activity has resulted in the recognition of the need for an increased infrastructure. Historically, the ...
J N R Ruddick